7 Series E65 745i (N62) SAL
Version B (quick-release coupling):
Note:
Windscreen wiper arm shown removed for purposes of clarity.
Check sealing ring on distributor for damage, replace if necessary.
Coat sealing ring with anti-friction agent.
Push water jet hose (1) in direction of arrow onto distributor.
Make sure water jet hose (1) and slide (2) are correctly seated
and engaged on distributor.
Close associated plug connection.
Clip cover cap onto wiper arm.
Make sure locks (1) are correctly engaged.
Perform one-touch wiping twice.
Check adjustment dimension between windscreen wiper blade
and cowl panel trim and adjust if necessary.
Check contact angle of windscreen wiper arm to windscreen and
adjust if necessary.
RA Removing and installing (replacing) left windscreen wiper arm (driver's side)
BMW AG - TIS
15.02.2013 03:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -