7 Series E65 745i (N62) SAL
65 77 635
Replacing sensor mat for left or right rear
seat occupancy detector (comfort seat)
Necessary preliminary tasks:
•
Remove seat cover for rear seat
Remove sensor mat (1) from padding (2).
Important!
To avoid malfunctions, make sure sensor mat (1) is cleanly
laid:
•
Lay plug-in connection in designated recess.
•
Lay sensor mat (1) straight and without kinks (large bending
radii).
•
If necessary, secure sensor mat (1) with adhesive tape
provided.
•
Feed sensor mat (1) in areas of transition (e.g. seat cushion
to side section) cleanly into penetrations of padding (1).
RA Replacing sensor mat for left or right rear seat occupancy detector (comfort sea
BMW AG - TIS
15.02.2013 06:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -