7 Series E65 745i (N62) SAL
Installation:
Do not kink ribbon cables (3) when assembling control
display (2) and MOST CAN gateway control unit (1).
Unlock plug connections (1) and disconnect.
Remove MOST CAN gateway control unit (2) from control
display (3).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Replacing MOST CAN gateway control unit
BMW AG - TIS
15.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -