7 Series E65 AlpinaB7 (N62) SAL
11 14 ...
Removing and installing/replacing support
block for radial compressor (BMW ALPINA
B7)
Necessary preliminary tasks:
•
Remove radial compressor
Release bolt (1) and remove tensioner with tension pulley (2).
Installation:
Tightening torque: 40 Nm.
Detach oil line (1).
Installation:
Replace seals.
Tightening torque: 25 Nm.
Unfasten screws (2).
Installation:
Tightening torque: 9 Nm.
Release bolt (3) and pull off support block straight towards front.
Installation:
Tightening torque: 41 Nm.
RA Removing and installing/replacing support block for radial compressor (BMW ALPIN
BMW AG - TIS
20.02.2013 04:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -