7 Series E65 AlpinaB7 (N62) SAL
Note:
Retaining clips (1) for oil line are fitted on bearing caps 3 and 5.
Release nuts on bearing caps L A2 to L A5.
Remove bearing caps L A2 to L A5.
Remove exhaust camshaft (1).
If necessary, replace plain compression rings (1).
Important!
Plain compression rings (1) can easily break.
Plain compression rings (1) are engaged at joint.
Press compression ring (1) on one side into groove, pull up on
other side and remove catch.
Carefully pull compression ring (1) apart and remove towards
front.
RA Removing and installing/replacing right exhaust camshaft (N62/N62TU)
BMW AG - TIS
20.02.2013 04:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -