7 Series E65 AlpinaB7 (N62) SAL
Important!
If the inlet or exhaust adjustment unit of the camshafts
"cannot" be locked as described, the adjustment unit is faulty
and must be replaced.
Place special tool 11 9 461 on inlet camshaft and check timing.
Note:
The timing is correctly adjusted when special tool 11 9 461
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Place special tool 11 9 462 on exhaust camshaft and check
timing.
Note:
The timing is correctly adjusted when special tool 11 9 462
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
If necessary, adjust camshaft timing on right side
Remove all special tools.
RA Checking camshaft timing on right side (N62/N62TU)
BMW AG - TIS
20.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -