7 Series E65 AlpinaB7 (N62) SAL
Place special tool 11 9 462 on exhaust camshaft and align
exhaust camshaft so that special tool 11 9 462 rests without a
gap on cylinder head.
Fit special tool 11 9 463 , secure screw (1) in thread for oil line
and tighten down by hand.
Note:
When tightening down screw (2), grip camshaft at hexagon head.
Tighten down screw (2) of exhaust adjustment unit.
Tightening torque 11 36 16AZ
.
Release screw (1), remove special tools
11 9 463 and
11 9 462 from exhaust camshaft.
RA Adjusting camshaft timing on right side (N62 / N62TU)
BMW AG - TIS
20.02.2013 04:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -