7 Series E65 AlpinaB7 (N62) SAL
Installation:
Replace O-rings (1 and 2) on solenoid valve (3) and lubricate.
Installation:
Press in solenoid valves as far as they will go.
Make sure holders are in correct installation positions.
Install and tighten down screws.
Now clear the fault memory.
RA Removing and installing/replacing both right solenoid valves (N62/N62TU)
BMW AG - TIS
20.02.2013 04:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -