7 Series E65 AlpinaB7 (N62) SAL
Important!
When installing, make sure lower edge of sealing face of air
filter element (1) rests on contact edge (2) of intake filter
housing.
In the event of incorrect installation, unfiltered air may get
into the intake system.
This will result in damage to the engine!
Installation:
Check sealing ring (1) in upper section (2) of intake filter
housing; replace if necessary.
RA Replacing air filter element (N62, ALPINA B7)
BMW AG - TIS
20.02.2013 06:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -