7 Series E65 AlpinaB7 (N62) SAL
17 11 046
Removing and installing/replacing module
carrier (BMW ALPINA B7)
Necessary preliminary tasks:
•
Remove cooling loop for power steering
Note:
Texts refer to and illustrations show the left side. The procedure is
identical for the right side.
Unfasten screws.
Installation:
Tightening torque: 5 Nm.
Note:
When replacing the module carrier, transfer the bracket (1) to the
new component.
Unfasten screws.
Installation:
Tightening torque 8 Nm.
RA Removing and installing/replacing module carrier (BMW ALPINA B7)
BMW AG - TIS
20.02.2013 06:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -