7 Series E65 AlpinaB7 (N62) SAL
Important notes on installation are described in this work
step.
Release screws and remove transmission underbody
protection (1).
Remove heat shields (1) and (2).
Only M57:
Release screws and remove underbody protection (1).
Unfasten nut.
Remove cable (1).
Installation:
Adjust cable
-
Release nut
-
Adjust cable by means of holder (2)
-
Spacing A = 1 mm
RA Removing and installing automatic transmission (6HP26Z/6HP32Z)
BMW AG - TIS
20.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -