7 Series E65 AlpinaB7 (N62) SAL
32 31 091
Replacing steering column
Necessary preliminary tasks:
•
Return steering to straight-ahead drive setting and remove
ignition key
•
Move steering column in "top" and "extended" position.
•
Disconnect battery negative lead
•
Remove steering column switch cluster
•
Unclip steering column gap cover and remove
•
Remove steering column control unit
Subsequent procedure is described in the document "Removing
and installing steering column".
After installation:
•
Carry out steering angle sensor adjustment
•
Initialize steering column using BMW diagnosis system
(control unit functions)
•
Perform function check:
I)
Check for ease of movement in overall adjustment range
of steering column to adjoining components/wires
II)
Turn steering wheel in both directions to full lock. The
airbag warning lamp must not light up in the process.
•
Check directional stability of car
RA Replacing steering column
BMW AG - TIS
20.02.2013 08:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -