7 Series E65 AlpinaB7 (N62) SAL
Unscrew nut (2).
Installation:
1.
Tighten knurled stud (1) hand-tight against housing of vane
pump
2.
Tighten down front bolts
Tightening torque 32 41 1AZ
.
3.
Replace self-locking nut (2) and tighten down
Tightening torque 32 41 1AZ
.
Unfasten screws.
Tightening torque 32 41 1AZ
.
Remove vane pump.
RA Removing and installing vane pump (N62) for power steering (up to 10 / 2003)
BMW AG - TIS
20.02.2013 08:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -