7 Series E65 AlpinaB7 (N62) SAL
41 21 510
Replacing front left door pillar (front side
panel removed)
Read contents of Body, General.
Spot-weld bonding is used for the first time on the E65. A
specific procedure must be followed here.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Support carrier, wheel arch, outer
-
(2) Connecting plate, side frame
-
(3) A-pillar, outer
-
(4) Attachment, entrance, outer
Open weld joints in areas (1).
Remove support carrier (2).
Open weld joints in area (1).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
20.02.2013 11:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -