7 Series E65 AlpinaB7 (N62) SAL
51 12 157
Replacing rear bumper trim
Necessary preliminary tasks:
•
Remove bumper trim
Build date from 03/2005:
•
Remove all rear body mouldings
Release expander rivets (1 and 2).
Remove thermal insulation (3).
Remove flap (1) for towing lug.
If necessary, unclip PDC wiring harness (2) and aerial (3) and
remove.
If necessary, remove flap and frame of trailer tow hitch.
ALPINA B7 exhaust cover:
Note:
Bumper trim can already by supplied cut to size.
Place exhaust cover (1) on cut bumper trim and check for
accuracy of fit; if necessary, rework bumper trim.
Clean adhesive area of bumper trim with spirit.
Apply adhesive bead (2) dia. = 5 mm as illustrated.
RA Replacing rear bumper trim
BMW AG - TIS
20.02.2013 11:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -