7 Series E65 AlpinaB7 (N62) SAL
51 31 021
Removing and installing / replacing rubber
frame for windscreen (top)
Necessary preliminary tasks:
•
Remove both trim strips on roof frame
Important!
Rubber frame (1) features an aluminium section inlay (2).
If necessary, detach adhesive tape (8) between rubber
frame (1) and roof outer skin.
Remove the 4 fitted spacer buffers (7).
Carefully wind out rubber frame (1) (windscreen breakage).
Note:
Tear-off lip (5) may be stuck to adhesive (4).
When rubber frame (1) is removed, tear-off lip (5) can tear off
and remain in vehicle.
3
Windscreen
6
Bridge
Installation:
If necessary, remove adhesive residue from roof outer skin.
After installing rubber frame, fit 4 new spacer buffers (1)*:
-
Shape B** in mm, square 12.7 x 10 x 3.8h
-
150 mm and 450 mm on left/right from centre
* Sourcing reference: BMW Parts Service
** Repair kit for windscreens
RA Removing and installing / replacing rubber frame for windscreen (top)
BMW AG - TIS
20.02.2013 13:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -