7 Series E65 AlpinaB7 (N62) SAL
61 71 ...
Procedure for replacing high-pressure lines
When replacing the H.P. lines, you must carry out a venting
procedure after filling the fluid reservoir.
During the venting operation, a large amount of washer fluid may
emerge from the spray nozzles. Have cleaning cloths at hand.
Call up service function "Vent headlight cleaning system" by way
of DIS or MoDiC (refer to Diagnosis and Information System). In
this case, the washer pump is activated for approx. 6 seconds
and the H.P. lines are vented.
Top up washer fluid.
RA Procedure for replacing high-pressure lines
BMW AG - TIS
20.02.2013 17:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -