7 Series E66 730Ld (M57T2) SAL
13 62 534
Replacing temperature sensor (M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove reinforcement plate
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Unlock plug (1) and remove.
Unclip cable.
Release temperature sensor (2).
Installation:
Tightening torque 13 62 1AZ
.
Installation:
Now clear the fault memory.
RA Replacing temperature sensor (M57T2)
BMW AG - TIS
03.02.2013 17:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
