7 Series E66 730Li (M54) SAL
11 24 571
Replacing all connecting rod bearings (M52 /
S52 / M52TU / M54 / M56)
Special tools required:
•
00 2 590
•
00 9 120
•
11 2 110
(piston removed)
Important!
Note grinding stages on crankshaft.
Install new conrod bearing shells.
Insert one blue (1) and one red (2) bearing shell (irrespective of
the color coding on the conrod shaft).
Install piston.
RA Replacing all connecting rod bearings (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
04.02.2013 21:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -