7 Series E66 730Li (M54) SAL
Remove module carrier (1) with radiator and A/C condenser from
rubber mounts and push at bottom approx. 5 cm towards rear.
Installation:
Rubber mounts fall out easily, ensure correct installation position.
Release retaining clip (1) on left.
Release retaining clip (1) on right.
Release screw and remove power steering cooling loop (2)
towards bottom.
Assemble vehicle.
Check all oil lines for leaks.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
04.02.2013 22:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
