7 Series E66 730Li (M54) SAL
Unscrew bolt (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Unfasten screws.
Tightening torque 24 00 1AZ
.
Installation:
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
RA Removing and installing automatic transmission (6HP19Z)
BMW AG - TIS
04.02.2013 22:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -