7 Series E66 730Li (M54) SAL
Distance A = 1 mm.
Note:
Version 2:
Grip clamping sleeve (1) and slacken nut (2).
Detach retainer (3) towards bottom using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
Note:
Version 3:
Release shift cable head (2) from ball head.
Installation:
Adjust selector lever
Release screw.
Take off holder (1).
Tightening torque 24 51 1AZ
.
Note:
Illustration shows E65.
Screw in special tool 24 5 361 until it is firmly connected with
shaft seal.
RA Replacing shaft seal for selector shaft (GA6HP19Z)
BMW AG - TIS
04.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
