7 Series E66 730Li (M54) SAL
34 51 550
Removing and installing/replacing DSC
precharging pump
Note:
Observe safety instructions on raising the vehicle.
After completing tasks, bleed brake system.
Remove microfilter (1).
Disconnect plug connection (1).
Installation:
Make sure plug connection engages correctly.
Release brake lines (1) and (2).
Installation:
Tightening torque 34 32 1AZ
.
Line connections (see designation on precharging pump):
HZ: Line to brake master cylinder
BA: Line to expansion tank
Important!
Do not mix up brake lines.
Catch escaping brake fluid.
RA Removing and installing/replacing DSC precharging pump
BMW AG - TIS
05.02.2013 00:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
