bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing _ Replacing Mirror On Left Or Right Front Door|Page 1473 > < 11 RA Removing And Installing_replacing Inner Trim On Window Frame (roller Sun Blind G
Page 1
background image

51 16 000

Removing and installing / replacing mirror on
left or right front door

Necessary preliminary tasks:

Partially lever out cover on door window frame (inside) in front

area

Release cable tie (1).

Unlock plug connection (2) and disconnect from control unit (3).

Raise seal (1) slightly and release screw (2).

Press rubber grommet (2) outwards.

Release screws (3) and feed out mirror (4) with cable.

Installation:

Tightening torque  51 16 1AZ

.

Connect plug connection (5) with speaker in cover (1).

Replacement:

Due to the thread-tapping screws, the tightening torque of the new
mirror is increased by 2 Nm.

Tightening torque 51 16 1AZ

.

RA  Removing and installing / replacing mirror on left or right front door

BMW AG - TIS

05.02.2013  02:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing _ Replacing Mirror On Left Or Right Front Door|Page 1473 > < 11 RA Removing And Installing_replacing Inner Trim On Window Frame (roller Sun Blind G