bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

24 RA Removing And Installing _ Replacing Decorative Trims (all) On Function Carrier|Page 1496 > < 23 RA Removing And Installing Function Carrier On Panel For Instrument Panel
Page 1
background image

51 16 175

Removing and installing / replacing
decorative trims (all) on function carrier

Special tools required:

00 9 318

Important!

When removing side decorative trims (1) or decorative
trim (2) for audio system controller:

Do not under any circumstances place a tool on the dotted
lines as this would destroy the decorative trim.

Side decorative trims:

Important!

Remove lower storage tray before removing side decorative
trims (risk of damage).

Fit protective cover (4) to prevent scratching.

Remove lower storage tray (drawer) from function carrier.

Using special tool  00 9 318  (universal wedge), lever out
catches (1) and remove decorative trim (2).

Detach decorative trim (3) in same way.

Installation:

If necessary, replace faulty clips (1) on left/right.

Catches (2) of decorative trim (3) must not be damaged.

RA  Removing and installing / replacing decorative trims (all) on function carrier

BMW AG - TIS

05.02.2013  02:44

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

24 RA Removing And Installing _ Replacing Decorative Trims (all) On Function Carrier|Page 1496 > < 23 RA Removing And Installing Function Carrier On Panel For Instrument Panel