7 Series E66 730Li (M54) SAL
51 16 190
Removing and installing / replacing lock
cylinder in centre armrest
Necessary preliminary tasks:
•
Remove center armrest closing cover
Refer to: Removing and installing/replacing decorative trim on
centre armrest
Actuate catches (1 and 3) gently in direction of arrow and
detach housings (2 and 4) in direction of arrow.
Installation:
Make sure catches (1 and 3) engage correctly.
Installation:
Move key (1) into illustrated (vertical) position.
Slide in lock (2) as far as it will go.
Guide (3) must be flush after housing halves have been fitted.
Actuate catches (1) gently in direction of arrow and detach
housing (2) in direction of arrow.
Installation:
Make sure catches (1) engage correctly.
RA Removing and installing / replacing lock cylinder in centre armrest
BMW AG - TIS
05.02.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -