bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 1578 > < 7 RA Removing And Installing_replacing Carrier For Outside Door Handle On Left Or Rig|Page 1576
Page 1
background image

51 22 170

Removing and installing / replacing outside
handle on left or right back door

Special tools required:

00 9 318

51 3 252

Lever out plugs (1 and 2) with special tool 

00 9 318 .

Tape off area around bore and door seal with fabric adhesive tape
(risk of damage).

Installation:

If necessary, fit new plugs.

Important!

Do not bend lockplate (2) too far inwards (risk of damage).

Unlocking outside door handle:

Insert special tool  51 3 252  into hole (1) of lockplate (2).

Lift lockplate (2) inwards out of guide (3) and push forwards

as far as it will go.

Installation:

Insert special tool  51 3 252  into hole (1) of lockplate (2)
and pull towards rear as far as it will go.

Perform function check:

Push lockplate (2) forwards again slightly until
resistance can be felt.

Outside door handle must be locked.

RA  Removing and installing / replacing outside handle on left or right back door

BMW AG - TIS

05.02.2013  03:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 1578 > < 7 RA Removing And Installing_replacing Carrier For Outside Door Handle On Left Or Rig|Page 1576