bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Roofliner (with Slide_tilt Sunroof And Rear A > < 3 RA Removing And Installing _ Replacing Headliner (with Slide_tilt Sunroof)|Page 1749
Page 3
background image

Installation:

Following parts of roofliner (5) must not be damaged or missing:

1

Mounting for console, front

2

Metal nuts for cover frame

3

Mounting for console, rear

4

Mounting to roof, rear

If replacing version with cable to inside rearview mirror:

Mark cutout (1) on roofliner.

A = Centre of roofliner

Up to 08/2005:

B = 16 mm

C= 20 mm

From 09/2005:

B = 16 mm

C= 22 mm

Important!

Ensure a clean cut so that roofliner cover is not damaged.

Cut out cutout (1) with scalpel.

Installation:

If necessary, use special tool 51 4 000 from E38/E39. 

Installation sequence:

1. 

Carefully attach headliner at rear.

2. 

Secure roofliner at front with expansion rivet (in left counter

support of sun visor)

3. 

Screw down grab handles at rear on left/right

4. 

Screw down grab handles at front on left/right

5. 

Screw down sun visors and counter supports

6. 

Screw down headliner at light aperture at front

RA  Removing and installing / replacing headliner (with slide/tilt sunroof)

BMW AG - TIS

05.02.2013  03:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

4 RA Removing And Installing_replacing Roofliner (with Slide_tilt Sunroof And Rear A > < 3 RA Removing And Installing _ Replacing Headliner (with Slide_tilt Sunroof)|Page 1749