bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing (replacing) Left Windscreen Wiper Arm (driver's Side) > < 3 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen|Page 2192
Page 1
background image

61 61 041

Replacing both windshield wiper blades

Move wipers into fold-back position:

Switch on terminal "R" and then switch on again immediately.

Press wiper lever upwards and hold for approx. 3 seconds

until wiper arms stop in roughly vertical position (fold-back
position).

Remove remote control (ignition key) from ignition lock.

Lift wiper arm and fold back wiper blades (3).

Press locking spring (1) in direction of arrow. Remove wiper
blade (3) in direction of arrow from wiper arm (2).

Installation:

Install new wiper blade and snap into place.

Fold wiper arms onto windshield.

Caution!

Before switching on terminal "R" or the ignition or starting the
engine, you must fold the wiper arms onto the windshield
otherwise damage will be caused.

Switch on terminal "R".

Move windshield wipers to rest position by one-touch wiping.

RA  Replacing both windshield wiper blades

BMW AG - TIS

05.02.2013  22:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing (replacing) Left Windscreen Wiper Arm (driver's Side) > < 3 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen|Page 2192