7 Series E66 730Li (M54) SAL
64 11 377
Removing and installing (replacing) control
panel for heater - A/C system
Necessary preliminary tasks:
•
Remove and install right trim on instrument panel.
•
Remove and install center trim on instrument panel.
Lever out clips (1).
Pull out control panel for heater - A/C system (2) in direction of
arrow.
Disconnect plug connections behind and remove control panel for
heater - A/C system (2).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) control panel for heater - A/C system
BMW AG - TIS
05.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -