7 Series E66 730Li (M54) SAL
Recycling:
Carry out the cleaning operation in a suitable washing bay as the
emerging cleaning agent escapes through the drain openings in
the transmission tunnel.
After completing cleaning, allow car to drip-dry for approx. 5
minutes.
Necessary preliminary tasks:
•
Remove transmission underbody protection
•
Move steering column in "top" and "extended" position.
•
Remove evaporator temperature sensor
Release screw (1).
Remove left footwell air duct (2) in direction of arrow.
Installation:
Make sure air duct in footwell on left (2) is correctly seated on
heating - A/C system (3).
Important!
Risk of damage!
To avoid damaging special tool 64 1 280 , carry out a
function check before starting cleaning.
It must be possible for the folding spray element (1) to be
inserted exactly into guide lug (2) so that special tool 64 1 280
can be guided out of heater without incurring damage.
RA Cleaning evaporator
BMW AG - TIS
06.02.2013 00:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
