7 Series E66 730Li (M54) SAL
65 50 011
Removing and installing (replacing) video
module for on-board monitor
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove flap in luggage compartment panel on left.
Note:
Follow instructions for handling optical fibers.
Installation:
Do not mix up antenna connectors (1).
Mark antenna plugs (1) and disconnect.
Unlock plug connections (2) and disconnect.
Release screws (3).
Feed out video module for on-board monitor (4) in direction of
arrow and remove.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
06.02.2013 00:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
