7 Series E66 730Li (M54) SAL
65 77 720
Removing and installing (replacing) left B-
pillar sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover
•
Remove panel for door pillar.
•
Remove retractor for front seat belt and place to one side.
Unscrew bolt (1).
Loosen screws (2).
Installation:
Tightening torque 65 77 5AZ
.
Make sure sensor is mounted without play.
Lift B-pillar sensor (3) slightly at screws (2) and remove towards
rear in B-pillar.
RA Removing and installing (replacing) left B-pillar sensor
BMW AG - TIS
06.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -