7 Series E66 730Li (M54) SAL
65 77 541
Removing and installing/replacing front left or
right acceleration sensor
Note:
Acceleration sensor only fitted in US version!
Necessary preliminary tasks:
•
Remove front bumper trim
Disconnect plug connection (1).
Release screws (2) and remove acceleration sensor (3).
Installation:
Tightening torque 65 77 9AZ
.
Replace screws (2).
RA Removing and installing/replacing front left or right acceleration sensor
BMW AG - TIS
06.02.2013 00:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
