7 Series E66 730Li (M54) SAL
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Remove and install flap in luggage compartment wheel arch
trim on right.
Unhook emergency actuation pull strap (1) in direction of arrow
from guide.
Release screws (1).
Unscrew nut (2).
Feed out fuse box incl. metal bracket (3) in direction of arrow and
fold downwards.
Loosen screws (1).
Installation:
Make sure servodrive for fuel filler flap (2) is correctly adjusted. It
must be possible to lock or unlock the fuel filler flap completely.
Feed out servodrive for fuel filler flap (2) towards rear.
Disconnect plug connection (3) and remove servodrive for fuel
filler flap (2).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
06.02.2013 01:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -