7 Series E66 730Li (M54) SAL
67 61 005
Removing and installing (replacing) drive with
gear for actuating slide/tilt sunroof
Necessary preliminary tasks:
•
Remove front console insert
Note:
Secure drive with gear for actuating slide/tilt sunroof (2) against
falling out.
Release screws (1).
Remove drive with gear for actuating slide/tilt sunroof (2) and
disconnect plug connection (3).
Installation:
Replace screws (1).
Installation:
Insert gear wheel (1) of drive for actuating slide/tilt sunroof (2) in
gear teeth (3).
Installation:
Initialise drive for actuating slide/tilt sunroof.
RA Removing and installing (replacing) drive with gear for actuating slide/tilt sun
BMW AG - TIS
06.02.2013 01:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
