7 Series E66 730Li (M54) SAL
67 65 019
Removing and installing/replacing drive for
left or right roller sun blind
Remove and install rear door trim.
Note:
Removal is shown on drive for roller sun blind (door window).
Roller sun blind (fixed door window) is removed in same way.
Unlock plug connection (1) and disconnect.
Release screws (2).
Installation:
Observe tightening torque, 67 65 1AZ
.
Remove drive for roller sun blind (3) in direction of arrow.
Installation:
Toothing (1) of drive for roller sun blind (2) must be placed
exactly on shaft (3).
RA Removing and installing/replacing drive for left or right roller sun blind
BMW AG - TIS
06.02.2013 01:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
