bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Eject Box (cordless Keypad Handset) > < 1 RA Overview Of Communications Systems (telephone)
Page 1
background image

84 11 550

Removing and installing/replacing hands-free
microphone

Lever out microphone trim (1) at front in direction of arrow.

Disconnect plug connection underneath and remove microphone
trim (1).

Unlock detent lug (1) and feed out hands-free microphone (2) in
direction of arrow.

Installation:

Arrow on hands-free microphone (2) points in driving direction.

Important!

Disconnecting the plug connection for the hands-free
microphone or emergency SOS call button results in fault
memory entries in the telephone control unit (limitation in the
emergency SOS call system).

After fitting, read out fault memory and if necessary delete
entries.

RA  Removing and installing/replacing hands-free microphone

BMW AG - TIS

06.02.2013  01:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Eject Box (cordless Keypad Handset) > < 1 RA Overview Of Communications Systems (telephone)