7 Series E66 730Li (N52) SAL
Release screw and remove magnet wheel (1).
Important!
Screw is not magnetic and is secured against falling out.
Important!
Magnet wheel (1) is extremely magnetic.
After removing, protect magnet wheel (1) against metal chips
by placing it in a plastic bag (2) with a seal.
Carefully press needle bearing (1) apart at split position only to
such an extent that it can be removed from eccentric shaft.
Important!
Needle bearing (1) can break very easily.
Install bearing shells (1) in such a way that ends of bearing
shells (1) face each other as shown in illustration.
Note:
Always replace bearing shells and needle bearings together.
RA Removing and installing/replacing eccentric shaft (N52)
BMW AG - TIS
06.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -