7 Series E66 730Li (N52) SAL
12 14 550
Replace control unit (DME) (N52)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery
•
Remove right fresh air duct
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car and key memory
•
CD "CIP"
Release screw and remove holder (1).
Release screws and remove cover (2).
Note:
Release screws on seal (3) only when removing wiring harness.
RA Replace control unit (DME) (N52)
BMW AG - TIS
07.02.2013 00:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -