7 Series E66 730Li (N52) SAL
13 71 000
Removing and installing/replacing intake filter
housing
Necessary preliminary tasks:
•
Switch off ignition.
Release clips (1).
Loosen retainers (5).
Remove top intake filter section (6) in direction of arrow.
Installation:
Attach top intake filter section (6) in retaining clips (4).
Release screws (3).
Remove intake filter housing (2) towards top.
Release retaining clip (3).
Remove intake duct (2) in direction of arrow.
Release screws (1).
Remove fresh air housing (4) in direction of arrow.
Assemble engine.
Check air intake system for leaks.
RA Removing and installing/replacing intake filter housing
BMW AG - TIS
07.02.2013 00:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
