7 Series E66 730Li (N52) SAL
Remove rear right wheel arch trim.
Fold strainer in insect strainer to one side.
Using special tool 16 1 070 , seal opening for insect strainer on
carbon canister.
Remove fuel filler cap and connect special tool 16 1 174 to fuel
filler neck.
Clamp special tool 16 1 174 on fuel filler neck with adjusting
wheel (1).
Important!
Set pressure regulator on special tool 16 1 171 fully in "-"
direction.
Connect special tool 16 1 171 using compressed air line (1) to
garage compressed air system (8...10 bar).
Connect pressure sensor (2) from Diagnosis and Information
System with a measuring range of 0...3.5 bar.
Important!
Do not connect fast-release coupling (3) of special tool
16 1 171 yet.
RA Checking fuel tank and tank ventilation system for leaks
BMW AG - TIS
07.02.2013 00:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -