7 Series E66 730Li (N52) SAL
17 11 000
Removing and installing radiator (N52)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Necessary preliminary tasks:
•
Follow instructions for working on cooling system.
•
Remove fan cowl
•
Drain coolant
•
Unlock and detach all coolant hoses on radiator.
If heat exchanger installed:
Unlock spring clip (1) in direction of arrow.
Remove heat exchanger (2) in direction of arrow.
Installation:
Attach heat exchanger (2) in upper retaining lug.
Unlock vent hose (1) on coolant expansion tank and detach.
Remove radiator (2) towards top.
Installation:
Ensure correct seating in side guides.
RA Removing and installing radiator (N52)
BMW AG - TIS
07.02.2013 00:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -