7 Series E66 730Li (N52) SAL
Important!
Only installed in E65!
Fit/reuse only mechatronics with protective bar (1) for
solenoid valve.
Installation:
Check gaskets (1 and 2) for damage, replace gaskets if
necessary.
Coat new seals with automatic transmission fluid and install.
Installation:
Insert screws (3) alternately until contact is made with each
screw head.
Insert all further screws contact is made with each screw head.
Important!
Tighten down screws in order 1...10.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Tightening torque 24 30 1AZ
.
RA Replacing mechatronics (GA6HP19Z)
BMW AG - TIS
07.02.2013 00:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -