7 Series E66 730Li (N52) SAL
32 13 ...
Fitting repair kit for FCD coupling
Special tools required:
•
32 1 021
•
32 1 022
•
32 1 023
Remove FCD coupling.
Only following parts can be replaced on coupling head:
(1)
FCD dirt seal
(2)
Support ring
(3)
O-ring
Important!
Support ring and O-ring must not be mixed up!
Always fit repair kit for FCD coupling completely.
Press in special tool 32 1 023 as far as it will go in connecting
piece on hydraulic steering gear. Then pull out again.
Remove spring ring (1) from special tool 32 1 023 .
RA Fitting repair kit for FCD coupling
BMW AG - TIS
07.02.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
