7 Series E66 730Li (N52) SAL
Version with headlight washer system:
Detach water hose (1) from high-pressure nozzle on right and
seal off with rubber plug.
Feed water hose (1) out of carrier.
Version with night vision:
Detach water hose (2) from night vision camera and seal off with
rubber plug.
Feed out water hose (2).
If necessary, detach high-pressure nozzle of headlight washer
system from carrier and unclip wiring harness (1) from carrier.
Release screws (1 and 2) on left/right.
Remove carrier towards front.
Tightening torque 51 11 4AZ
.
RA Removing and installing / replacing carrier for front bumper trim
BMW AG - TIS
07.02.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -