7 Series E66 730Li (N52) SAL
51 16 405
Removing and installing/replacing roller sun
blind on side window of left or right rear door
Necessary preliminary tasks:
•
Remove rear function carrier
Disconnect plug connection (1).
Unfasten screws (2 and 3).
Unclip brush cable (4) and remove roller sun blind module.
Installation:
Tightening torque for screws (2) 51 16 10AZ
.
Tightening torque for screw (3) 51 16 11AZ
.
Release screw and remove roller sun blind from brush unit.
Installation:
Tightening torque 51 16 12AZ
.
Feed guide (1) into guide hole (2).
Turn module.
Unclip clips (A) and remove.
Unclip clip (B) (1) and pull out of guide (2).
RA Removing and installing/replacing roller sun blind on side window of left or rig
BMW AG - TIS
07.02.2013 17:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
