7 Series E66 730Li (N52) SAL
51 17 400
Removing and installing/replacing bump stop
with ejector for filler flap
Release cover (1).
Press catches (2) together and pull out ejector (3).
Installation:
Install ejector (3) with fitted cover (1).
Installation:
Catches (1) on ejector (2) must not be damaged.
Make sure cover (3) is correctly seated on ejector (2).
RA Removing and installing/replacing bump stop with ejector for filler flap
BMW AG - TIS
07.02.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -