7 Series E66 730Li (N52) SAL
Unlock catch (1) and detach Bowden cables (2 and 3) from
rear lid lock upper section (5).
Lever Bowden cable (2) out of guide (4).
Installation:
Bowden cable (2) must be correctly positioned in guide (4).
Release screw (1).
Feed out Bowden cable with holder (2) from rear lid.
Installation:
Retainer (5) must be correctly fitted.
Bowden cable (3) and retainer (5) must be correctly fitted on
lock element (4).
Overview of Bowden cables on rear lid lock:
1
Fastener (lock cylinder)
2
Rear lid lock (upper section)
RA Removing and installing/replacing Bowden cable for manual rear lid unlocking (up
BMW AG - TIS
07.02.2013 18:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -