7 Series E66 730Li (N52) SAL
Note:
Remove control unit in rear center armrest.
Release screws (1).
Unclip switch unit (2) on left and right with assembly wedge (4)
and remove.
Slide side trim (3) on left and right in direction of arrow as far as it
will go and remove.
Unclip front trim (5) with assembly wedge (4) and remove
towards front.
Release left and right screws (1).
Remove trim (2).
When replacing trim:
Release screw (1) and remove lock (2).
Remove switch unit (1) on left and right towards top.
Installation:
Slide switch unit (1) on left and right into guide.
RA Replacing lower armrest section for rear seat backrest
BMW AG - TIS
07.02.2013 20:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -